TSI Incorporated DUSTTRAK DRX 8533, Руководство по эксплуатации и обслуживанию

Страница: 7 / 85

v
Safety Information
I M P O R T A N T
There are no user serviceable parts inside the instrument. Refer all repair
and maintenance to a qualified factory-authorized technician. All
maintenance and repair information in this manual is included for use by a
qualified factory-authorized technician.
Laser Safety

The Model 8533/8534 DustTrak DRX monitor is a Class I laser- based
instrument

During normal operation, you will not be exposed to laser radiation

Precaution should be taken to avoid exposure to hazardous radiation in
the form of intense, focused, visible light

Exposure to this light may cause blindness
Take these precautions:

DO NOT remove any parts from the DustTrak DRX monitor unless you
are specifically told to do so in this manual

DO NOT remove the housing or covers. There are no serviceable
components inside the housing
W A R N I N G
The use of controls, adjustments, or procedures other
than those specified in this manual may result in exposure
to hazardous optical radiation.
W A R N I N G
There are no user-serviceable parts inside this
instrument. The instrument should only be opened by TSI
or a TSI approved service technician.
W A R N I N G
If the DustTrak monitor is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
When operated according to the manufacturer’s instruction, this device is a
Class I laser product as defined by U.S. Department of Health and Human
Services standards under the Radiation Control for Health and Safety Act of
1968. A certification and identification label like the one shown below is
affixed to each instrument.