TSI Incorporated 8550, Руководство по эксплуатации и обслуживанию

Страница: 12 / 43

Chapter 2
6
Manually Setting the Real-Time Clock
To set the time and date with the keypad, you must press and hold the
SAMPLE key down while the Q-T
RAK
displays the time of day during
its power-up sequence. Release when the Q-T
RAK
“beeps.” You will
have an opportunity to view and/or change the hours, minutes, year,
month and day of month in sequence. Use the up and down arrow keys
(
!"
) to change a setting. Use the
SAMPLE
key to store each setting
and advance to the next one.
Using the Probe Stand
For your convenience, the Q-T
RAK
is supplied with a probe stand so
that the probe can be located above a table surface while unattended. To
use it, simply detach the probe from the Q-T
RAK
mounting clips and
slide it onto the stand.
Connecting the Optional Model 8925 Portable Printer
To connect the Model 8925 printer to the Q-T
RAK
, locate the Printer
Interface cable (supplied with optional printer) and connect the 9-pin
end labeled
“PRINTER” to the printer and the other end to the data port
on the Q-T
RAK
. Always turn the Q-T
RAK
on BEFORE the printer. If the
printer prints question marks (??????), asterisks (******), or random
characters, reset it by turning it off and then on again. If necessary, refer
to the
Model 8925 Portable Printer Operation and Service Manual .