TScale TN-M Series, Техническое руководство

Страница: 22 / 31

TN-M series crane scale technical manual
- 19 -
7. CALIBRATION
1) Press
ON/OFF
key to turn
ON
the Scale;
2) Press
TARE
key during that start up until display will be shown
P1---
;
3) Then input password,the default password is 000 ;
4) Press
G/N
key to move the active digit;
5) Press
TARE
key to increment a digit;
6)
Press
ZERO
key to confirm, display will shows
“ F0 cal ”
;
7) Press calibration switch ,the switch is locating below the housing;
8) Press
ZERO
key to enter calibration, display shows
“
Unload
”
;
9) Empty the hook,when the [  ] indicator above STABLE appears, press
ZERO
key to
confirm,display will show calibration weight value;
10) You can change this weight value, using
SLEEP
key to clear the active digits ,
using
G/N
key to move the active digit right,using
TARE
key to increment a digit;
11) Press
ZERO
key to confirm;
12) Display show
“ LOAD ”
, add calibrate mass weight on the hook.
13) When the [

] indicator above STABLE appears ,press
ZERO
key to confirm,display
show
“
PASS
”
,it will be self-checking and back to normal weighing mode.
If display show any error message,please re-calibrate the scale again.