TN-M series crane scale technical manual
- 7 -
5. OPERATION
Initial Start-up
Warm-up time of 15 minutes stabilizes the measured values after switching on.
5.1 Switching on/off
Switch on the scale by pressing
ON/OFF
key.Display will be show the scale version
and will be starting self checking.
After self checking, display will be come to normal weighing mode.
To switched off the scale, press
ON/OFF
key again.
5.2 Zeroing
Environmental conditions can lead to the balance exactly zero in spite of the platform
not taking any strain. However, you can set the display of your balance to zero any time
by pressing
ZERO
key and therefore ensure that the weighing starts at zero.
5.3 Using Tare
The weight of any container can be tared by pressing TARE button so that with
subsequent weighing the net weight of the object being weighed is always displayed.
Taring a container
Load weight on the hook.
Press
TARE
key. Zero is displayed, and tare is subtracted. And NET indicator will be
on.
Remove weight from the hook. Tared weight is displayed. It can set only one tare
value. It will be shown with a minus value.
Press
G/N
to change between gross weight and net weight.
Clearing tare
To clear the tare value, remove the load from the hook.
Press
TARE
key. Zero is displayed, the NET indicator off ,tare weight is cleared.
5.4 Select Weighing Units
Load the weight on the hook,Example: display show 0.8 kg
Hold
SLEEP
key for 3 seconds in normal weighing mode.
The weight will be convert to
t
unit ,the indicator of left side display will
appear,Example: display show 0.0008 t
Hold
SLEEP
key again to back to kilogram mode.
5.5 Overload Warning
Please do not add item that is over the maximum capacity. When reading
“
--ol--
”
,
remove the item on the hook to avoid damage to the load cell.
