TSC TTP-245 series, Руководство пользователя

Страница: 11 / 41

6
Fig. 5 Ribbon installation (II)
3.3 Loading Label Stock
1.
Insert a 1” label spindle into a paper roll ( *
I
f your paper core is 1 inch, remove the
1.5” core adapter from the fixed tab. If label width is 4 inch wide, two fixing tabs are
not required. ).
Fig. 6 Label roll installation (I)
2. Open the printer’s top cover by releasing the green top cover open levers located
on each side of the printer and lifting the top cover. A top cover support at the rear of
the printer will hold the printer top cover open.
Rear Hub
Ribbon
Lead Tape
Ribbon supply spindle
Ribbon Rewind Spindle with Paper Core
Paper Roll
1” Label Spindle
Printing Side
Face Up
1.5” Core
Adapter
*
Fixed Tab