TS SiteSentry, Руководство пользователя

Страница: 4 / 58

teSentry
User Manual of Site Sentry ANPR/Speed Camera System
3
Safety Instruction
These instructions are intended to ensure that the end user can use the product correctly
to avoid danger to themselves or other road users.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’.
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage my be caused if any of these cautions are
neglected.
Warnings
1. In the use of this product you must strictly comply with the electrical safety
regulations of your nation and region.
2. Source the camera system with DC 12v, this to be provided by the IP 65 240v AC
switch mode power supply which is included in the original packaging for this product.
(mains option only)
3. Do not connect several devices to the power adapter provided as adapter overload
may cause over heating and possible fire hazzard (mains option only)
4. Please ensure that all plugs are firmly inserted into power sockets where applicable.
5. When the product is installed onto a lamp post or other structure, the device should
be firmly fixed.
6. If smoke, odour or noise should emit from the device, turn off the power at once
and unplug the power cable, then contact the service centre.
7. If the product does not work properly please contact your dealer or service centre.
Never attempt to disassemble the Site Sentry camera system yourself. (we shall not assume
any responsibility for problems caused by unauthorised repair or maintenance)
Cautions Follow these precautions
to prevent potential injury or material
damage
!
Warnings Follow these safeguards to
prevent serious injury or death