TS SiteSentry, Руководство пользователя

Страница: 16 / 58

teSentry
User Manual of Site Sentry ANPR/Speed Camera System
15
Chapter 3
Adjusting the Site Sentry Camera System
to suit your circumstances
3.1 Framing the video capture area
Again similar to the representation shown on your mobile device but using the advantage
of a larger screen size, you can direct the camera view to contain sufficient content as to
make subsequent viewing of video footage to be most informative.
This section may be sufficiently covered off in section 2.11 and may only be needed for
fine tuning in the future
3.2 Focus and Zoom via Internet Explorer
Although we pre set these systems prior to leaving our factory and the camera systems are
auto focus there may sometimes be a need for the end user to make subtle adjustments to
both original focus datum point and amount of zoom.
This can be accessed by being connected directly to the auxiliary ethernet port with a
lap top PC loaded with Internet Explorer and opening IE (internet explorer) and keying
into the search bar the IP address for the ‘overview’ camera as shown on your
‘shipping card’ eg. 192.168.1.24 and return.
This will take you to an access screen for a Hikvision web interface where you will be
asked for a username and password.
If these settings are
still in their default
mode, they will be:
Username:
admin
Password:
Speedsign*
admin
Speedsign*