Tryton TUV14BL2, Руководство по эксплуатации

Страница: 7 / 52

depths and remove the drill from the borehole from time to time to The tool housing must be cleaned with use of a moistened cloth
remove borings from the borehole.
To drill large diameter boreholes it is recommended to start with
After cleaning let
drilling a low-diameter borehole and then expand it to the desired
the tool dry completely before it is used again.
diameter. It prevents the tool from overloads.
When the drilling bit is seized during working switch immediately the
Store and transport the tool in its transport box to protect it against
tool off to prevent it from being damaged. Switch the rotations
humidity, dust penetration and small objects; remember to protect its
direction to the anticlockwise rotations and then remove the drilling
ventilation openings. Small objects after getting into the casing can
bit from the borehole.
result in damage to the motor.
Keep the drill aligned with the axis of the borehole. The drilling bit
must be positioned perpendicularly to the surface of the machined
PROTECTION OF THE ENVIRONMENT:
material. When the perpendicularity fails to be maintained the
The symbol nearby denotes that old equipment must
drilling bit may be seized or broken or, under extreme circumstances,
never be thrown away together with other waste (with the
the operator may be injured.
penalty of a fine). Hazardous components of electronic
Rotation speed of the drill spindle is controlled by the force the power
equipment may adversely affect the natural environment and
switch is depressed with.
human health.
Driving screws
Each household may contribute to the recovery and reuse (recycling) of
It is recommended to drill the pilot borehole first. The pilot borehole must
old machinery and equipment. Both in Poland and Europe a system for
be a little deeper and with a less diameter than the outer diameter of the recovery of used equipment either exists or is being created. The system
screw thread. When the screw is to be driven within the vicinity of the
obliges all organizations that sell such equipment to collect the used
material edge the pilot borehole prevents from undesired chipping of the
machinery and appliances. Moreover, general purpose collecting points
material.
for such equipment are available.
If the screw is driven with abnormal difficulty the screw must be
PICTOGRAMS:
retracted and the pilot borehole diameter should be enlarged.
Explanation of the icons located on the nominal plate and the
Anyway, when problem to drive the screw in persists (e.g. in case of hard
information tags :
wood grades) try to use a lubricating agent (e.g. liquid soap). Press the
tool to the screw with sufficient force to avoid spontaneous rotation of
the driving bit in the screw head. Use only those bits that accurately
match the bit head. When the screw head is damaged further driving the
screw in or out may prove infeasible.
MANUFACTURER:
Remember to always disconnect the battery from the tool prior
PROFIX ; ul. Marywilska 34 , 03-228 Wars z aw a , POLAND.
to starting the cleaning operations and unplug the charger from the outlet.
This appliance is in conformity with national and European standards as
The charger may be cleaned exclusively with use of a dry cloth.
well as with general safety guidelines.
Use also a clean cloth to clean regularly the ventilation openings of the
tool to keep them patent. From time to time disassemble the grip and
Any repairs are allowed to be carried out exclusively by qualified staff
remove dust and other rubbish from the interior. with use of original spare parts.
small
quantity of soap and then wiped dry. Do not use any detergents or
2. solvents as they can damage parts made from plastics.
3.
NOTE:
n
CAUTION:
Sp. z o.o.
TRANSPORTATION:
4.
STORAGE AND MAINTENANCE:
The tool in principle does not require any special maintenance or service.
The tool must be stored in a place that is not accessible to children and
must be kept clean and protected from moisture and dust. The storage
conditions should prevent potential mechanical damage and impact of
the weather conditions.
7
« » Always wear appropriate eye protection
« » Use appropriate hearing protection
«Read this instruction before switching on the
power supply and starting the work»
TROUBLESHOOTING GUIDE:
PROBLEM POSSIBLE CAUSE REMEDY
Irregularities of the motor
operation.
Worn carbon brushes of the motor. Have the brushes replaced at a service workshop.
The tool (drill/screwdriver)
fails to operate. No power voltage, damaged
motor or the power trigger.
Check the battery status, recharge or replace with a new one when necessary.
When the problem persists hand over the tool for repair at a service workshop.
Please refer to the warranty sheet for addresses of authorized workshops.
Battery low. Recharge the battery.
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.