Tryton TMM10034 Скачать руководство пользователя страница 5

Страница: 5 / 48

Device components

BEFORE YOU START:

The numbering of device components refers to graphics presented on page

1. Make sure that parameters of the power supplying source correspond

2 of the user's manual:

to parameters required for the hammer drill specified on its rating
plate.

SDS-plus tool holder

2. Make sure that the On/Off trigger (

) of the hammer drill is in the Off

Dust protection hood

position

. Always work with use of the auxiliary handle (

). Risk of accidents at

work can be avoided or mitigated if the machine is reliably held in

Button to release locking of the operation mode selector switch

both hands. The auxiliary handle is to be attached by encompassing

Operation mode selector switch

the drilling chuck with the handle clamp and then the clamp is locked
by rotating the handle clockwise.

On/Off trigger

The auxiliary handle can be swiveled to whichever direction to enable
the operator to work in a convenient position of the body and to avoid
excessive fatigue. After rotating the handle anticlockwise swivel it to
the desired position and the retighten the clamp by rotating the
handle clockwise for final fixation.
Depress the fixing button (

) to slide the drilling depth limiter (

)

into the opening in the auxiliary handle and then lock it by releasing
the fixing button. Notches on the drilling depth limiter should be seen
from the top.

SPECIFICATIONS:

4. While working with an electric extension cable make sure that

parameters of the extension cable and cross-sections of wires
correspond to electric parameters of the hammer drill. Extension
cords should be as short as possible. When in use extension cords
must be fully uncoiled.

ADJUSTMENT DURING WORKING WITH THE TOOL:

Adjustment of the drilling depth

(Fig.

)

The drilling depth limiter (

) is designed to set the desired depth of the

drilling bit immersion

into the material. For that purpose do the

following:

insert the shank of the SDS-plus working tool into the holder (

) and

drive it home. Otherwise, excessive play of the SDS-plus tool may lead
to incorrect setting of the drilling depth;

depress the fixing button(

) for the drilling depth limiter and slide the

limiter so much as to make the distance between the tip of the drilling
bit and the tip of the limiter correspond to the desired drilling depth

lock the depth limiter by releasing the fixing button.

Selection of drilling tools (bits)

For impact drilling in concrete, bricks or stone as well as for chiseling one
has to use SDS-plus tools that are to be inserted into the SDS-plus holder
(

) of the machine.

To drill boreholes in steel or wood the tools without the SDS-plus
functionality are used (e.g. drilling bits with cylindrical shanks). For such
tools quick locking drilling chucks or chucks with a toothed ring are
necessary.

CAUTION:

Do never use tools without the SDS-plus functionality for impact

drilling or chiseling! The non-SDS-plus tools and corresponding drilling
chucks shall definitely get damaged during impact drilling or chiseling.

Installation of the drilling chuck with a toothed ring

(Fig.

)

Screw the SDS-plus adapter stud (

) into the drilling chunk with a

toothed ring (

The vibration level value given refers to basic application of the tool. If the
tool  is  used  for  other  applications  or  with  other  tools,  or  if  it  is  not
maintained  properly,  the  vibration  level  may  differ  from  the  values
given. The  above-mentioned  causes  may  lead  to  higher  exposure  to
vibrations during the whole work time.
One must implement additional safety measures to protect the operators

from exposure to vibrations, such as maintenance of the electric tool and
work tools, assurance of proper hand temperature, or determination of
the sequence of work operations.

Locking sleeve

Fixing button to fit the drilling depth limiter