Secure Web Gateway 11.5 Setup Guide
Copyright © 2013 Trustwave Holdings, Inc. All rights reserved.
21
show_proxy_connections
Shows the status of proxy connections.
show_route
Allows system administrators to view the Kernel IP routing table.
show_time
Allows system administrators to view the time, date, time zone and ntp settings.
show_version
Shows the currently installed SWG version.
supersh
Enables root access to the appliance. This command is reserved for Trustwave Support only.
tcpdump
Allows the user to intercept and display TCP/IP and other packets being transmitted or received over a
network to which the computer is attached. It writes all the information into a tcpdump file. This file can
then be downloaded for further analysis. Up to 4 files of 100 MB each are kept. When the fourth file gets
full, the first file is deleted (i.e.cyclic progression). SFTP, such as WinSCP, is required in order to
download the files.
top
Displays all the running processes, and updates the display every few seconds, so that you can
interactively see what the appliance is doing.
traceroute
Displays the route over the network between two systems, listing all the intermediate routers a
connection must pass through to get to its destination. It can help you determine why connections to a
given server might be poor, and can often help you figure out where exactly the problem is.
uptime
Produces a single line of output that shows the current time, how long the system has been running (in
minutes) since it was booted up, how many user sessions are currently open and the load averages.
