4.4. 4. Chiller
The chiller unit is used to cool the condenser “arm”.
Parts List
1. Chiller Unit
2. Connection tubing included (1/2” silicone)
Not Included:
1 gallon of glycol
10 feet of 1/2” silicone tubing (for plumbing inside room)
Insulation for silicone tubing
All copper plumbing and 1/2” hose barbs
Setup Required by Customer
1. Have either a plug, or a 110V wall switch (recommended)
to power the chiller
2. Run copper plumbing to the 1/2” hose barbs
3. Make sure you have enough silicone hose inside the
room to reach your DR-10 unit
Note: The chiller run inside the room should not be more than 5 feet.
TruSteel
DR-10 CUTSHEET AND OPERATING MANUAL - 1
Page 8 of 21
