Vibration Feedback Rally Master
4
3. Installation
3.1. Assembling the steering wheel
Figure 1: The steering wheel components
To assemble the steering wheel, proceed as follows:
1.
Place the steering wheel on the table.
2.
Take the table clamps (C) and check if they will fit around the table's edge. See
figure 1. The clamps are not essential, but they provide extra stability. Use one or
more extenders for a thicker table top, or no extenders for a thinner table top.
3.
If the clamps fit the table, install them. Do not overtighten.
4.
Place the pedals on the floor.
5.
Connect the power supply adapter (G) to socket (B) on the steering wheel
assembly.
6.
Connect the power supply adapter to the mains supply.
This completes the assembly of the steering wheel and pedal set. Refer to section 3.2
for instructions for connecting the 'Vibration Feedback Rally Master' to your computer.
