Vibration Feedback Rally Master
11
Problem
Cause
Possible Solution
Installed previously.
Follow steps 1 to 6 of chapter 3.2.2.
The steering wheel should be on the
list in figure 2, in which case it has
been installed correctly.
USB port disabled.
Activate the USB port (refer to the
computer manual) or use the joystick
port.
The USB adapter is
not found when it is
connected.
No Windows 98.
USB works only with Windows 98 or
later. Use the joystick port of your
computer instead of the USB port.
Computer hangs, or
other components fail
when the USB
adapter is connected.
USB port shares
interrupt with another
device.
Assign a unique IRQ number to the
USB port. If this cannot be done, or if
you do not know how to do this, do
not use the USB adapter and use the
joystick port of the computer.
Check the Internet (www.trust.com) for the FAQ's.
Please contact your dealer if you still have problems after you have tried these
solutions. Please keep the following information ready:
•
The order number of your Vibration Feedback Rally Master. This number can be
found below the bar code on the packaging.
•
The port being used: joystick port or USB port.
•
The Windows version number and language.
•
The type of processor in the computer and its clock speed.
•
Exact error message or a good description of what fails to work, and when.
