TRUST 732AV LCD POWER VIDEO
17
U K
3.
Click on ‘Start -> Programs -> TRUST 732AV LCD Power Video -> Power
Video Manager’.
4.
Figure 10 will appear. The image will be displayed on the screen.
5.
If necessary, use buttons 5 and 6 to alter the settings. The frequency in
Europe is 50 Hz. The image is less distorted when the ‘Flicker filter’ function
is enabled. The best setting for ‘Bandwidth’ is 6.
6.
Press the record button (1, figure 10).
7. A
window
will appear in which you can specify whether the recording should
have a time limit and how long this time limit should be. You can also alter the
location and the file name.
8.
Click on ‘Save’. A window will appear which indicates that the camera is
ready for use (‘Capture’).
9.
Click on 'OK'. The recording will now start. If you have set a time limit, the
recording will be stopped once the time limit has elapsed.
10.
Press button 2 (see figure 10) to stop the recording. The recording has now
been successfully made.
Item
Description
Function
1
Start recording
Starts recording the image which is visible
on the screen (11).
2
Stop recording
Stops the recording.
3
Status screen
Indicates what the program is doing.
4
Take a snapshot
A photograph is taken of the current image.
5
Video format
Alters the resolution of the video image.
6
Video settings
Alters the image (for example, the
brightness). Set the filter to 50 Hz for use in
Europe. The setting for the bandwidth can
be reduced to improve the response of the
computer (gives a poorer image quality).
7
Start or stop playing the
recording
Press this to stop playing the recording if
you wish to transfer to the save mode.
8
More settings
Here, you can turn the ‘Flicker filter’ on and
off. Turn the filter on if parts of the image
flicker.
9
Indicator for the save
mode
This indicator is lit when the camera is in
the save mode.
10
Indicator for the live
mode.
This indicator is lit when the camera is in
the live mode.
11
Video screen
Shows the image viewed by the camera.
12
Hide screen
Hides the screen, but does not close the
program. It is recommended to first stop the
image using button 7.
13
Close
Closes the program.
Table 12: Trust DV Power Video Manager used in the live mode. Use this table
together with figure 10.
7.1.5
Opening saved photographs or video clips
1.
If you wish to connect the camera (this is not necessary), select the ‘DV disk’
mode (see figure 7).
2.
Click on ‘Start -> Programs -> TRUST 732AV LCD Power Video -> Power
Video Manager’.
3.
In the left-hand side of the screen (12), scroll to the location where you have
saved the photographs and video recordings.
4.
The recordings will be visible as icons.