TRUST 732AV LCD POWER VIDEO
12
3.
Select ‘Settings’ (item 5, figure 2) and press the menu button briefly.
4.
Scroll to the delete symbol (12, figure 2).
5.
Press the menu button for a short period. The camera will display a warning.
6.
Consider whether you wish to delete all the recordings. Select ‘No’ to cancel.
7.
Select ‘yes’. The contents of the memory will now be deleted.
Tip
:
Instead of deleting all the recordings from a CF card, you can also
choose ‘Format’ (symbol 13, figure 2). The result will be the same, i.e.
all the files will be deleted. Formatting is recommended when using a
new memory card or if the memory card can no longer be used.
Note:
Deleted files cannot be retrieved. Your recordings will be deleted for
good after carrying out the instructions given above.
4.8.4
Connecting the camera to a TV
The camera can be connected to a TV. You will then be able to play all the
recordings (including audio recordings) on the TV. The LCD screen will be turned off.
A standard RCA AV cable is supplied with the camera.
1.
Connect one end of the AV cable to the camera (12, figure 1).
2.
Connect the other end of the AV cable to your TV. Your TV must have a
video input. The yellow plug is for the image signal and the white plug is for
the sound signal. You will need an adapter if your TV only has a SCART
plug. This can be purchased from most TV and radio shops.
3.
Set your TV to display the video input.
4.
Turn the camera on (see chapter 4.4). The camera image will now be visible
on your TV. You can also use the menu according to figure 2.
Note:
The camera’s AV output is not suitable for connecting to the aerial
connection on your TV. Your TV must have a video input.
Tip
:
If you do not see an image and hear a loud humming sound through
the speakers, then you may have connected the image and audio
plugs to the wrong connections. Swap the image and audio plugs and
try again.
5
Installing the software
5.1
Removing old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old device. The best solution is to first remove all drivers related to old
devices before installing the new driver. Make sure you only delete programs for old,
unused (similar) devices.
Old drivers for webcams, TV cards and video editing cards can affect with the
webcam function (live image).
1.
Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which will be displayed).
2.
Click on ‘Start – Settings – Control Panel’ and double-click on the
‘Add/Remove Programs’ icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4.
Restart the computer.