TRUST 460LR MOUSE WIRELESS OPTICAL OFFICE
7
U K
7 Troubleshooting
Method
1.
Read the solutions given below.
2.
Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet (www.trust.com/13683).
Problem
Cause
Possible solution
The batteries have been
inserted incorrectly.
Insert the batteries into the
battery compartment as
indicated.
The optical unit on
the bottom of the
mouse does not
light up after
inserting the
batteries.
The batteries are empty.
Place the mouse in the
recharger. The batteries are
fully recharged when the red
light on the RF receiver is no
longer lit.
The RF receiver has not
been connected to the
computer correctly.
Check the PS/2 connection.
The LED on the RF
receiver does not
light up.
The computer is turned
off.
Turn the computer on.
The mouse’s detection
button has not been
pressed for long enough.
Keep the detection button
pressed until the green LED
on the RF receiver stops
flashing.
The batteries have been
incorrectly inserted into
the mouse.
Insert the batteries into the
battery compartment as
indicated.
The batteries in the
mouse are empty.
Place the mouse in the
recharger. The batteries are
fully recharged when the red
light on the RF receiver is no
longer lit.
The selected channel is
disrupted by another RF
signal.
Select a different channel
and have the RF receiver
and mouse detect each
other again (see chapter 4).
The RF receiver
does not detect the
mouse and the
green light
continues to flash
quickly.
The distance between the
receiver and the mouse is
too great.
The distance must not be
greater than 2.5 metres.
It has not been connected
correctly
Connect the mouse correctly
(see chapter 4.1).
The receiver is not
detected by
Windows.
Software for your
previous mouse is still
installed.
Remove the old software
(see chapter 4.4).
!
