Sound Bar
Speaker - USER’S MANUAL
4
Mac system
- Click on the Bluetooth icon in the taskbar.
- Make sure Bluetooth is on.
- Go to ‘set up Bluetooth device…’.
- Select ‘Trust BT Audio’ in the list of Bluetooth devices (make sure the device is in pairing mode).
- Click on ‘Continue’.
- If the pairing attempt was unsuccessful. Go to ‘Passcode options’.
- Select ‘Use a specific passcode’.
- The passcode to use is ‘0000’.
- Click on ‘ok’.
- Click on ‘Continue’.
-
Your device is now ready to use.
Wired connection
13 A
- Connect the sound bar to the coaxial output of your Blu-Ray/DVD player by using the coaxial cable
(make sure that you configure your player to send out the audio signal in PCM format).
B
- Connect the sound bar to the audio output of your TV by using the 3.5mm to cinch audio cable.
- Connect your MP3 player or any other device with an 3.5mm audio output by using the 3.5mm audio
cable.
Remote control
A
Mute
B
Treble & Bass control
C Volume
control
D Equalizer
presets:
NOR Normal
POP Pop
music
CLA Classical
JAZ Jazz
ROC Rock
E
Virtual Surround & Bass
F
Source selection (select the preferred audio
source; Bluetooth, Coaxial, AUX 1, AUX 2)
G Standby
button
