Sound Bar
Speaker - USER’S MANUAL
2
Installation
A
Bluetooth Pairing button
B Coaxial
input
C
3.5mm audio inputs
D
Main Power switch
E LED
indicator
Blue: Active
Red: Standby
Blue/Red blinking:
Bluetooth pairing mode
F Standby
button
G Volume
-
H Volume
+
I
Source selection (select the preferred audio input)
J Feet
mounts
K Remote
control
L
3.5mm audio cable (to connect a mp3 player)
M
3.5mm to cinch audio cable (to connect a TV)
N
Coaxial cable (to connect a dvd/blu-ray)
O Speaker
feet
P
Wall mount plugs and screws
A
B
For desk mount:
- Attach the feet ‘O’ to the speaker.
For wall mount:
- Drill 2 holes in the wall at 400mm from each other.
- Use the supplied plugs and screws to mount the speaker on the wall.
- Connect the power cable to the wall socket.
- Power on the speaker by switching the power switch ‘D’ on the rear of the speaker.
- Press the standby ‘F’ button (the indicator LED will turn blue).
Connect using Bluetooth
step 4
Wired connection
step 13
- Select the Bluetooth source on the remote control.
- Press and hold the pairing button ‘A’ for 3 seconds.
- The LED indicator ‘E’ will start flashing Blue/ Red alternating (pairing mode).
- Follow the steps required for your device as described in the following pages.
If a passcode is requested during the configuration of the device Use ‘0000’.
4
3
1
2
