Trust Wireless Keyboard & Mouse
4
3. Connecting
Note:
The Wireless Keyboard and the Wireless Mouse only work when connected to your computer's
PS/2 port!
1. Turn the computer off and remove the plug from the wall socket.
2. Remove the old keyboard from your computer.
3. Remove the old mouse from your computer.
4. Fix the wrist support to the Wireless Keyboard.
5. Connect the plugs from the Wireless Receiver to the computer's keyboard connection and mouse
connection (see figure 1).
6. Insert the computer's plug back into the wall socket.
Figure 1: Connecting
4. Inserting the batteries
Note:
Inserting the batteries incorrectly can damage the keyboard and the mouse!
4.1 Wireless
Keyboard
1. Open the two battery flaps on the bottom of the keyboard by pushing the flaps in the direction indicated in
figure 2 and then pulling the flaps off of the keyboard. Do not use excessive force. The battery
compartment will now be visible.
Figure 2: Inserting the batteries
2. Insert the four AA batteries into the battery compartment as indicated by the diagram. Pay attention to the
polarity.
3. Fit the two battery flaps back onto the keyboard.
