2
INTRODUCTION
The compressor duty life can be maximized when using it correctly and
giving regular service.
This MANUAL delivers operating instructions and maintenance. Read it
carefully and save it as guide for the compressor correct operation.
The compressor design is for compressed air production. The air
produced is not meant for breathing or to be in direct contact with food.
The unit should only be used for the function it was made for. Any other
type of use will be considered incorrect and dangerous. The
manufacturer will not be liable for any damage caused by incorrect,
inappropriate or dangerous use.
The unit is not suitable for outdoors
SPECIFIC SAFETY INSTRUCTIONS
IMPORTANT:
Before using the unit please read and follow the following
safety instructions
•
Only people who previously read the MANUAL and have knowledge
about the standards of a correct and safe operation should use the
compressor.
•
Use care when using compressed air. Never aim airflow towards
people or animals. Do not use compressed air to clean clothes.
•
Breathing compressed air is forbidden.
•
The compressor shall be set in a fix and stable position. Use care
with horizontal positions.
•
Do not exceed the maximum operation pressure. Use the unit at
41 ºF and 104 ºF room temperature.
•
Never operate the unit when parts are missing.
•
The unit functional parts could get hot during operation. Let it cool
down after using.
•
After each use the tank should be ventilated. Wipe dry any
remaining humidity. Not drying the tank could be dangerous.
•
Double check the electric circuit has an adequate protection and
matches the motor power, voltage and frequency. Verify there are
a grounded connection and a differential circuit breaker device.
•
Never open the motor button box. Contact a Truper Authorized
Service Center if necessary.
•
The alert and caution symbols and instructions
included in this MANUAL cannot cover all possible conditions or
situations occurring. The user has to understand that all the safety
factors are not included and are not caused by the product. It is
your own responsibility using common sense and caution when
operating this unit.
•
Only people reading and understanding the correct use of the
compressor shall use the unit. Incorrect use can be dangerous.
DANGEROUS TAGS
The tags fixed to the compressor are part of the unit. They were designed
for safety purposes and for no reason at all they can be removed or
modified.
SETTING
The compressor shall be set in a way that every fixture designed to
carry it are functional. Use care with horizontal positions. The motor
needs enough cool air. Never cover the ventilation areas. Set the
compressor in a cool and dustless area. Never set the compressor into
a room that is going to be painted. Paint could clog the air filter and
get accumulated into the compressor.
Keep in mind that the On/Off switch, the tank drain, and the oil deposit
cap are easy to reach. Leave an open space of approximately 11.8” for
ventilation and maintenance.
The compressor performance may be considerably reduced
when there is not enough air supply, in high temperatures or if the air
filter is clogged.
CONNECTION TO THE MAIN POWER SUPPLY
The compressor shall be set as close as possible to the main power
supply. Double-check the power supply matches the voltage indicated
in the motor nameplate.
This unit must be grounded.
WARNING
This unit SHOULD BE USED with
115 V~ to 127 V~
feeding tension.
Using a different TENSION WILL
SEVERELY DAMAGE the unit.
GROUND
CURRENT
CAUTION
NOTE
WARNING
This tool is in compliance with
the Official Mexican Standard
(NOM - Norma Oficial Mexicana).
