Truper 12464, Руководство пользователя

Страница: 10 / 32

45° miter cut
-45° miter cut
0°
bevel cut
35°
bevel cut
0° miter cut
Tightening Up
10
25
16
15
17
26
28
• To make up to ±45° bevel cuts adjust the cutter head
column into the desired angle.
• Loosen the bevel cut knob (
25
).
• Pull out the blocking lock for 0° bevel cuts ( 28 ) to release
the cutting head column. Move the column using the bevel
cut scale ( 26 ) as a guide.
• Once the column is in the desired angle tighten the knob
to block its position.
• Double-check to tighten the knob to
fix the column before starting to cut. Otherwise the cutter
head could move and cause severe injury.
• To return the cutter head to 0° position loosen the bevel
cut knob and return the column to 0° position until the
blocking lock for 0° bevel cuts gets automatically inserted
and securing the column in that position. Tighten the bevel
cut knob.
Tighten up the cutter head to make bevel cuts
Tighten up the rotating table to make miter cuts
• To make 45° and up to -45° miter cuts use the rotating
table ( 15 ).
• Loosen the control knob (
17
) to release the rotating
table.
• Turn the table into the desired angle. Use the miter scale
( 18 ) as an aid. This scale is built with 0°, ±15°, ±22.5 °
±30° and ±45° stops to quickly set the most common
miter angles.
• Release the blocking lock to fix the table.
• Double-check the knob is tightened to
fix the table before starting to cut. Otherwise the table
could move and cause a severe injury.
WARNING
WARNING
ENGLISH