E
G
F
D
B
A
8
Set up
• Slide the parallel guide slot (
C
) into the screw on the
back of the router and secure it in place by tightening
the knob (
D
).
• Depending on the work to be performed, the router
accepts different types of auxiliary guides: parallel
guide, edge guide or copying guide.
Parallel guide installation
• Slide the edge guide slot (
E
) into the screw on the
back of the router and secure it in place by tightening
the knob (
D
).
Edge guide installation
• Attach the chip cover (also vacuum port) (
A
) to the
front of the router base.
• To secure it in place, tighten the knob (
B
).
• The cover must be mounted and
secured before operating the router.
Splinter shield assembly
• Loosen the screws and remove the base protector (
F
).
• Put the copying guide (
G
) on the base and replace the
base protector. Then fasten the base protector by
tightening the screws.
Assembly of the copying guide
C
D
ENGLISH
CAUTION
