Truper 102272, Руководство пользователя, Страница: 8 / 20

8
• Secure the workpiece to be drilled in the walrus clamp
( A ).
• Insert the required drill bit into the drill chuck of the drill.
• Lower the lever until the drill hole is drilled.
• To drill a hole of a certain depth:
1 . Lower the lever so that the drill bit contacts the
workpiece.
2 . Note the value indicated on the depth scale ( B ).
3
. Advance the drill bit into the workpiece until the pointer
on the scale reaches the required depth.
4
. At this point secure the measurement with the depth
adjustment knob ( C ).
Start up
A
B
C
ENGLISH