Trumpf TKF 1100-0, Руководство оператора

Страница: 18 / 24

18
Operation
E543EN_03.DOC
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine the material.
–
Place machine on the sheet and at first maintain a few
centimetres clearance between the cutting tool and the
sheet edge.
–
Carefully slide the machine as far as possible against the
sheet edge "piercing".
–
Slide the machine along the sheet in such a way that the
machine axis is roughly parallel to the sheet edge.
–
Press the machine against the sheet edge while doing so.
Press and release the On/Off switch (12).
4.2 Changing the cutting direction
Depending on the application, the tool can be mounted to permit a
different cutting direction
•
Install tool after turning it either 90° to the right or 90° to the left.
1. Open locking mechanism (10).
2. Turn the carrier (9) in the desired direction.
3. Close locking mechanism (10).
Working with the TKF 1100-0
Switching off the TKF 1100-0