Trumpf TKF 1100-0, Руководство оператора

Страница: 6 / 24

6
Description
E543EN_03.DOC
2.1 Correct use
Warning
Danger of injury!
Only use the machine for the tasks and materials described in
"Intended use".
The TRUMPF TKF 1100-0 bevelling machine is an electric hand
tool used for the following applications:
•
Preparation of all K-, V-, X- and Y-shaped welding grooves
used for gas and electrical fusion welding with various angles
of bevel and continuously adjustable lengths of bevel.
•
Forming of uniform, oxide-free, bright metallic welding bevel
edges in steel and aluminium.
•
Machining of chromium steel and similar high-tensile materials.
•
Bevelling of straight and curved edges insofar as the minimum
radius with inner curves is at least 40 mm.
•
Bevelling of edges on flat and crooked workpieces, particularly
in connection with tubes when the inside diameter is at least 80
mm in size.
•
Bevelling of edges in both directions, whereby the bevelling
can begin and end at any give point on the sheet edge.
•
Bevelling of edges on large, bulky workpieces, for which the
bevelling machine is guided as a hand-held device.
•
Bevelling of edges in normal position (carrier underneath the
machine) and in "upside-down position" (carrier above the ma-
chine), which is particularly advantageous with the bevelling of
X- and K-welding grooves.