Trumpf N700-1, Руководство оператора

Страница: 7 / 12

5
N700-1
GB
E211en1_2.doc
Wearing plate
The wearing plate protects the die carrier from
excessive wear. Check the wearing plate regularly
and replace when worn.
Damage to property
Excessive wear can overstrain the machine
and negatively affect the cutting quality.
Fig. 9468
Punch penetration depth
The punch should penetrate 1 to 3 mm into the die.
Punch penetration depth Fig. 9015
•
Turn eccentric shaft (21) until the punch (9)
reaches its maximum depth of penetration.
•
Loosen screw (36)
•
Turn die carrier (7) repeatedly through 360° until
the punch penetration depth of 1-3 mm is
reached.
•
Re-tighten screw (36).
The wearing plate must be replaced in the case of excessive
wear to the raised portion (1) (sheet stop), or if the depression
(2) is no longer visible!
(Order No. 119173)
7 Die carrier 21 Eccentric shaft
9 Punch 36 Clamping screw
E Penetration depth