Trumpf N700-1, Руководство оператора

Страница: 3 / 12

1
N700-1
GB
E211en1_2.doc
N i b b l e r N700-1 Fig. 9545
N700-1 Specifications
Max. material thickness:
•
Steel up to 400 N/ mm² 7.0 mm
•
Steel up to 600 N/ mm² 5.0 mm
•
Steel up to 800 N/ mm² 3.5 mm
•
Aluminium 250 N/ mm² 10 mm
Smallest radius in curved cutouts 135 mm
Sheet profile (90°): Bend radius inside min. 10 mm
Start hole
∅
for die min. 60 mm
Width of cut 11 mm
Working speed approx. 1.4 m/min
Nominal power consumption 2900W
Number of strokes at nominal load 400/min
Weight 12.2kg
Operating pressure (flow pressure) 6 bar
Air consumption at 6 bar 3.1m³/min
Required inner
∅
of compressed air hose 18 mm
(max. output not reached if
∅
is smaller)
Noise / Vibration
Measured values established in acc. with EN 50 144.
The A-weighted noise level of the unit is typically:
sound level 86
dB (A); acoustic capacity level
94 dB (A).
Wear ear protection!
The hand-arm vibration is typically lower than
2.5 m/s².
Proper use
The TRUMPF Nibbler N-700-1 is a portable
pneumatic tool used to
•
cutting flat workpieces from materials that can be
punched, such as steel, aluminium, non-ferrous
heavy metals, and plastic
•
cutting tubes or profile workpieces such as tanks,
crash barriers, troughs etc.
•
nibbling straight or curved outside edges and
inside cutouts
•
nibbling according to scribed line or with a
template
Nibbling of material produces distortion-free cut
edges.
GB
1 Die
5 Punch guide
7 Die carrier
9 Punch
21 Eccentric shaft
36 Clamping screw (= Mounting screw
for die carrier)
37 Cheesehead screw (2) for mounting
the handle
38 Handle (can be mounted in 2
positions)
345 Lever, or on/off switch
38
21
36
37
5
1
9 7 37 345