E517EN_03.DOC
Operation
15
The machine cannot be placed up against the beginning of the
channel.
Preparation of the channel so that the machine can be brought into
position.
3
2
1
1
Pre-formed suspension lug
2
Moulding for pre-forming the
suspension lug
3
Handle on the moulding
1. Move lever (1) into position against the direction of feed (Tool
open).
2. Set machine up against desired (prepared) position on the
channel.
3. Position lever (1) in direction of feed. (Tool in work position).
–
The working direction (direction of feed) of the machine is
determined by its design.
4. Switch on the machine.
5. Close the lock seam.
6. Move lever (1) into tool open position.
7. Switch off machine and remove from the machining position.
Flange at the beginning of
the channel
Fig. 13412
