12
Operation
E517EN_03.DOC
4. Operation
Caution
Damage to property possible due to too-high network
voltage!
Damage to the motor.
¾
Check the power supply. The power supply must correspond
to the information on the machine type plate.
Warning
Danger of injury possible due to improper handling!
¾
When working with the machine, always ensure that it has a
secure base.
¾
Never touch the tool while the machine is running.
¾
Always guide the machine away from the body while working.
¾
Do not work holding the machine above your head.
4.1 Working with the F 300-2
¾
Move the On/Off switch downwards.
In order to improve work results, lightly oil the rollers or the sheet
with universal oil (Order No. 138648).
Depending on the construction type of the channel to be machined,
a distinction is made between 2 possible ways of commencing
work:
•
Channel
open.
•
Flange at the beginning of the channel.
Switching on
Working with the F 300-2
