Truma Powrtouch Freedom RV, Инструкция по эксплуатации

Страница: 3 / 24

Issue 1 – January 2020 Page 1
SECTION 1
– USING YOUR POWRTOUCH FREEDOM SAFELY
1.1 SAFETY CHECKS REQUIRED PRIOR TO USING YOUR POWRTOUCH FREEDOM
⚠️ PLEASE READ CAREFULLY:
Before moving the RV with the Powrtouch Freedom, for safety reasons it should always be
tested first. To do this turn on the Powrtouch Freedom at the Isolation Switch
–
DO NOT PUT
THE ROLLERS ON TO THE TIRES . With the rollers off the tires check the handset functions
drive the rollers correctly. Once this test has been satisfactorily completed only then should
you engage the rollers to the tires and commence to move the RV.
IF IN DOUBT CONTACT TRUMA
1.2 EMERGENCY SWITCH OFF/STOP
ℹ️ In the unlikely event of the Powrtouch Freedom malfunctioning, the system can be
switched off by pressing either
of the ‘On’ buttons (D or F) on the handset. Then turn off the
Powrtouch Freedom at the Isolation switch and remove the key. DO NOT switch the
Powrtouch Freedom back on before consulting Truma .
1.3 SAFETY & TECHNICAL AWARENESS
Please read the following instructions and technical information carefully and become familiar
with the various components and controls prior to assembly and/or operation. Safety must
always be the first consideration in fitting and operation. Failure to comply with these
instructions could invalidate your Powrtouch guarantee. If you are in any doubt about the
assembly or operation of the product consult Truma, for which contact details are shown on
the front cover.
•
The Powrtouch Freedom RV Mover (except handset) is a 12volt DC powered device
and it should not under any circumstances be powered by any other power source than
a 12volt DC leisure battery.
ℹ️
Using the Powrtouch Freedom with the RV connected to the ac power supply
could cause damage to the RV internal charging system.