4
EN
Remote control
Mover
smart
Mover
smart
Mover
smart A
Mover
smart M
1
3
9
5
4
2
6
7
8
10
1
3
9
5
4
6
7
8
Figure 2
1
Move the caravan forward
2
Engage the Mover (only Mover smart A)
3
Rotate the caravan clockwise (via right axle)
4
Switch off (red) / emergency off switch
5
Rotate the caravan anti-clockwise (via right axle)
6
Move the caravan backwards
7
Rotate the caravan clockwise (via left axle)
8
Switch on (green)
9
Rotate the caravan anti-clockwise (via left axle)
10
Disengage the Mover (only Mover smart A)
Setting up the Mover
Prior to using the Mover, observe the
“Safety instructions”!
– Establish the Mover power supply via the battery cut-off
switch.
– If the caravan is disengaged (apply the parking brake or
secure against rolling away), engage the mover.
Engaging Mover smart A
– Switch on remote control. (See “Switching on the remote
control”)
– Press the button (Figure 3 - 2) on the remote control for
approx. 5 sec. and then release. The drive roller is engaging.
The indicator (Figure 3 - 1) flashes during the process.
Only after the indicator on the remote control stops
flashing, the process is complete and the remote control
can send new commands.
1
2
Figure 3
Engaging Mover smart M
– Insert the engagement key onto the toggle crank.
1
2
Figure 4
– Tighten the engagement key in the direction of the tyre
until the drive roller is positioned on the tyre and the
position indicator in the housing shows “√”. In the end
position, the drive unit securely engages. This is to be
checked on both sides prior to manoeuvring.
1
Figure 5
– Removing the engagement key
The drive roller must be firmly positioned on both wheels.
Operating instructions