CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
11
TREADMILL ASSEMBLY STEPS (continued):
STEP 4 Secure Pedestal:
a
) Insert 2 socket cap screws with star washers
into the front holes on both sides of the
treadmill, but do not tighten.
b
) Repeat the process for the rear holes on each
side of the treadmill.
c
) Repeat the process for the middle holes on
each side of the treadmill.
d
) Tighten all six screws.
Hardware Required:
6 Socket Cap Screws
6 star washers
STEP 5 Attach Handrails:
a
) Insert 2 socket cap screws and 2 star washers
under the top of each handrail. But don’t
tighten.
b
) Insert 1 self-tapping screw at the base of each
hand rail and then tighten all screws.
Hardware Required:
4 Socket Cap Screws
4 star washers
2 Self-Tapping Screws
STEP 6 Install Trim End Caps:
a
) Snap the trim end caps into place on each side
of the treadmill.
First
Third
Second
