CHAPTER 4: PROGRAMMING & OPERATION
Truefitness.com / 800.426.6570 / 636.272.7100
18
CONSOLE OVERVIEW (continued):
Console Display:
Used to monitor or control a work out and feature navigation.
Workout Keys:
Allows the user to select one of the preset workouts, heart rate control workouts or custom workouts.
Start:
Allows the user to begin a Quick Start workout or preset workout.
Incline Keys:
Manually increases or decreases the incline of the treadmill.
Warning Decal:
Important safety information for users to review prior to using the equipment.
Stop:
Stops/Pauses a workout. Press and hold this key for five seconds to reset the unit.
Speed Keys:
Manually increases or decreases the speed of the belt.
Enter:
Used to confirm a selection in a preset workout.
Quick Speed Key:
Use of this key will allow the user to quickly switch between various preset speeds by using the numeric keypad.
HRC Cruise:
While in any program, Cruise Control will allow the user to set current heart rate as target heart rate by pressing a single
button. The Cruise Control program takes control of SPEED and INCLINE to maintain the users target Heart Rate.
Change Display
Toggles between multiple values that are displayed on the Console Display.
Numeric Keypad:
A panel of keys on the console that allow the user to quickly enter numeric data or use the Quick Speed feature.
Safety (E-Stop) Key:
A tethered safety device designed to attach to both the user and the treadmill console. Removal of the key from
the console will stop belt motion to prevent injury in an emergency.
*The safety key must be in place on the treadmill, and should be attached to the user’s clothing. The treadmill
will not operate if the safety key is not attached to the treadmill.
