background image

28

28

WARRANTY INFORMATION (U.S.A & CANADA ONLY!)

T

RUE

 

R

EFRIGERATION

MADE IN

SINCE 1945

U.S.A.

®

THREE YEAR PARTS & LABOR WARRANTY

ADDITIONAL TWO YEAR COMPRESSOR WARRANTY

404A/134A COMPRESSOR WARRANTY

WARRANTY CLAIMS

WHAT IS NOT COVERED BY THIS WARRANTY

 

 TRUE warrants to the original purchaser of every new TRUE refrigerated unit, the cabinet and all parts thereof, to be free from defects in 

material or workmanship, under normal and proper use and maintenance service as specified by TRUE and upon proper installation and start-up in 

accordance with the instruction packet supplied with each TRUE unit.  TRUE’s obligation under this warranty is limited to a period of three (3) years 

from the date of original installation or 39 months after shipment date from TRUE, whichever occurs first.

 

Any part covered under this warranty that are determined by TRUE to have been defective within three (3) years of original installation or 

thirty-nine (39) months after shipment date from manufacturer, whichever occurs first, is limited to the repair or replacement, including labor charges, 

of defective parts or assemblies.  The labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined 

by TRUE.

 

Warranty does not cover standard wear parts which include door gaskets, incandescent bulbs or fluorescent bulbs.  Warranty also does 

not cover issues caused by improper installation or lack of basic preventative maintenance which includes regular cleaning of condenser coils.

 

 In addition to the Three (3) year warranty stated above, TRUE warrants its hermetically and semi-hermetically sealed compressor to be free 

from defects in both material and workmanship under normal and proper use and maintenance service for a period of two (2) additional years from the 

date of original installation but not to exceed five (5) years and three (3) months after shipment from the manufacturer.

 

Compressors determined by TRUE to have been defective within this extended time period will, at TRUE’s option, be either repaired or 

replaced with a compressor or compressor parts of similar design and capacity.

 

The two (2) year extended compressor warranty applies only to hermetically and semi-hermetically sealed parts of the compressor and 

does not apply to any other parts or components, including, but not limited to: cabinet, paint finish, temperature control, refrigerant, metering device, 

driers, motor starting equipment, fan assembly or any other electrical component, etcetera.

The two year compressor warranty detailed above will be voided if the following procedure is not carefully adhered to:

 

1. This system contains R404A or R134A refrigerant and polyol ester lubricant.  The polyol ester lubricant has rapid moisture absorbing 

qualities.  If long exposure to the ambient conditions occur, the lubricant must be removed and replaced with new.  For oil amounts and specifications 

please call TRUE technical service department (800-325-6152).  Failure to comply with recommended lubricant specification will void the compressor 

warranty.

 

2. Drier replacement is very important and must be changed when a system is opened for servicing.  A drier using XH-7 desiccant or an 

exact replacement solid core drier must be used.  The new drier must also be the same capacity as the drier being replaced.

 

3. Micron level vacuums must be achieved to insure low moisture levels in the system.  500 microns or lower must be obtained.

 

 All claims for labor or parts must be made directly through TRUE.  All claims should include: model number of the unit, the serial number of 

the cabinet, proof of purchase, date of installation, and all pertinent information supporting the existence of the alleged defect.

 

In case of warranty compressor, the compressor model tag must be returned to TRUE along with above listed information.

Any action or breach of these warranty provisions must be commenced within one (1) year after that cause of action has occurred.

 

TRUE’s sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below.  This 

warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty.

 

NO CONSEQUENTIAL DAMAGES.  TRUE IS NOT RESPONSIBLE FOR ECONOMIC LOSS; PROFIT LOSS; OR SPECIAL, INDIRECT, OR 

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSSES OR DAMAGES ARISING FROM FOOD OR PRODUCT SPOILAGE CLAIMS 

WHETHER OR NOT ON ACCOUNT OF REFRIGERATION FAILURE.

 

WARRANTY IS NOT TRANSFERABLE.  This warranty is not assignable and applies only in favor of the original purchaser/user to whom 

delivered.  ANY SUCH ASSIGNMENT OR TRANSFER SHALL VOID THE WARRANTIES HEREIN MADE AND SHALL VOID ALL WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

 

IMPROPER USAGE.  TRUE ASSUMES NO LIABILITY FOR PARTS OR LABOR COVERAGE FOR COMPONENT FAILURE OR OTHER DAMAGES 

RESULTING FROM IMPROPER USAGE OR INSTALLATION OR FAILURE TO CLEAN AND/OR MAINTAIN PRODUCT AS SET FORTH IN THE WARRANTY 

PACKET PROVIDED WITH THE UNIT.

 

RESIDENTIAL APPLICATIONS:  TRUE assumes no liability for parts or labor coverage for component failure or other damages resulting from 

installation in non-commercial or residential applications.

 

ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FLOOD, ACTS OF GOD.  TRUE 

is not responsible for the repair or replacement of any parts that TRUE determines have been subjected after the date of manufacture to alteration, 

neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.

 

IMPROPER ELECTRICAL CONNECTIONS.  TRUE IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF FAILED OR DAMAGED 

COMPONENTS RESULTING FROM INCORRECT SUPPLY VOLTAGE, THE USE OF EXTENSION CORDS, LOW VOLTAGE, OR UNSTABLE SUPPLY VOLTAGE.

 

NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE:  THERE ARE NO OTHER WARRANTIES, 

EXPRESSED, IMPLIED OR STATUTORY, EXCEPT THE THREE (3) YEAR PARTS & LABOR WARRANTY AND THE ADDITIONAL TWO (2) YEAR COMPRESSOR 

WARRANTY AS DESCRIBED ABOVE.  THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED 

WARRANTY AND MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF.

 

OUTSIDE U.S/CANADA.:  This warranty does not apply to, and TRUE is not responsible for, any warranty claims made on products sold or 

used outside the United States or Canada.

THIS WARRANTY ONLY APPLIES TO UNITS SHIPPED FROM TRUE’S MANUFACTURING FACILITIES AFTER JANUARY 1, 2013. 

PRODUCT MUST BE PURCHASED IN THE COUNTRY WHERE SERVICE IS REQUESTED.

Содержание TFP-48-18M-D-4































Отзывы: