............ www.truemfg.com ............
7
7
True Food Service Equipment, Inc.
Adjusting Castors for Proper Leveling
Level unit. If unit is not level shims are required. Follow
these instructions to install shims.
1.
Remove front and rear grill depending upon which castor
needs adjusting. Locate the castor box. (See image 1).
2.
Lay unit on it’s back. Use soft packing material and be
careful not to scratch the unit. Remove pans and lid and
place them to the side before laying unit on it’s back.
3.
Each unit has one castor box different from the others.
This box is totally inclosed. Remove this castor box from
bottom of unit. Back out four screws anchoring the box.
You will need a
1
/4” hex head nut driver to disassemble
this castor box. (See image 2).
4.
Loosen castor with tool provided. (See image 3).
5.
Install the desired number of shims, making sure the slot
of the shim is in contact with the threaded stem of the
castor. (See image 4). If more than one shim is used, turn
the slot at a 90° angle so they are not in line.
6.
After adjusting castor reassemble and reinstall castor box.
Then carefully upright unit and reinstall pans and lid.
INSTALLATION / OPERATION INSTRUCTIONS
LEVELING AND CASTOR ADJUSTING
TFP MODELS ONLY
1
2
3
4
Locate castor box
One castor box on each unit
is fully enclosed.
Loosen castor.
Install shims.
Castor Box
Anchor
Screws
