True T-19-HC Скачать руководство пользователя страница 9

Страница: 9 / 31

TRUE

traditional

reach

ins

www

truemfg

com

SHELF INSTALLATION:

For Proper Shelf Clip Installation Please Read The Following
Instructions.

STEP 1

Install the top tab of the shelf clip into the proper hole. Push up on
the bottom of the clip. (See image 1).

STEP 2

Bottom tab of the shelf clip will fit tightly. You may need to squeeze or
twist the bottom of the shelf clip to install. (See image 2 & 3).

STEP 3

After installation, the shelf clip will fit snug into the shelf standard.
The shelf clip should not be loose or able to wiggle out of the shelf
standard.

SHELF INSTALLATION TIPS

1. Install all the shelf clips before installing the shelves.
2. Start at the bottom in terms of shelf installation and work your

way up.

3. Always lay the back of each shelf down on the rear clips before

the front.

WARNING!

Do not use pliers or any crimping tools when installing shelf clips.
Altering shelf clips in any way can lead to shelving instability.

Installing top tab of shelf clip

You may need to squeeze or twist
the bottom of the shelf clip to
install

Installing bottom of the shelf
clip

Shelf clip installation complete

Содержание T-19-HC
































Результаты поиска

Содержание T-19-HC

Отзывы:

Похожие инструкции для T-19-HC

Бренды по названию

Популярные бренды

True T-19-HC, Руководство по установке

Результаты поиска

Содержание T-19-HC

Отзывы:

Похожие инструкции для T-19-HC

Бренды по названию

Популярные бренды