FIRST GEAR - 10R80 Wiring Diagram reference for the 10RStager
● Cut the SSF wire (Blue/Grey) and connect the Dark Blue Wire to the PCM side
● Cut the SSC wire (Grey/Orange) and connect the Grey Wire to the PCM side
● Cut the SSB wire (Green/Brown) and connect the Light Green Wire to the PCM side
● Connect the Pink Wire to the Brake Pedal Position Switch Signal wire (Violet/White)
● Connect the White Wire to the Brake Pedal Position Switch Power wire (Green/Red)
● Connect the Tan Wire to the SSF wire (Blue/Grey) that is connected to the 10R80
● Connect the Orange Wire to the SSC wire (Grey/Orange) that is connected to the 10R80
● Connect the Yellow Wire to the SSB wire (Green/Brown) that is connected to the 10R80
Note: The signal at the light blue wire can be used to initialize a 2-step or other devices. If a 2-step interface is
needed, attach to the light blue wire after the Transbrake Enable button. If the 2-step interface requires a low
signal input a relay may need to be used and the light blue wire connection can be used to trigger the relay.
Page 2
