True Manufacturing Company TCGDZ-50, Руководство по установке

Страница: 14 / 21

............ www.truemfg.com ............
True Food Service Equipment, Inc.
12 12
INSTALLATION / OPERATION INSTRUCTIONS
FORMICA KIT INSTALLATION:
FORMICA KIT COMPONENTS:
(2) Formica Top End Panels 10
3
/
4
"w x 33"h
(27.3 cm x 83.8 cm).
(2) Bottom End Panels
(1) left side, (1) right side (Formica glued to
black plastic panel with 4 key hole slots).
(1) Formica Front Panel
width will vary x 7
5
/
8
"h (19.4 cm)
NOTE
Please use care when installing the Formica. Formica can
chip, crack, or break.
NOTE
Refer to image 1 for placement of Formica panels.
A.
Install the front Formica panel.
Be sure bottom end panels are off in order to
install front panel. Slide front panel into top and
bottom tracks on the front of the cabinet. Make
sure panel is even on both left and right end of the
cabinet (images 1 & 2).
B.
Install the top end Formica panels (one on each
side. Be sure bottom end panels are off in order to
install top end Formica panel. Both top end panels
are the same size so they each can be used
for left or right of the cabinet. Slide
panel up into black plastic tracks
on the top side panel of each end of
cabinet (images 1 & 3).
NOTE
After installing the bottom end pieces the top end panel
will stay in place.
C. Install the bottom end Formica panels (one on
each side.
(Formica is pre-glued to black plastic panel).
Line up the four keyhole slots in each bottom end
piece to the (4) screws on the side of the cabinet.
Slip the (4) large keyholes from the bottom end
piece over the (4) screws. Then push down to
fasten the bottom end piece onto the cabinet
(images 1 & 3).
NOTE
The bottom left and right pieces are not the same. The
taller part of the bottom end piece goes to the rear of the
cabinet as shown in image 3.
OPTIONAL
(INSTALLING OPTIONAL FORMICA KIT)
1
2
3
Four key-
holes on
backside.
Formica top
end panel
will slide up
into plastic
tracks. Formica top
end panel
will rest on
screw. Formica bottom
end panel will lock
through keyholes on
backside of bottom
end piece.
STEP A
Side view of Formica sliding into
place for front panel and top end
panel.
STEP C
STEP B
STEP A
Tracks to hold
Formica.
Formica.