manualshive.com logo in svg

True Manufacturing Company GDM-HST02-HC-TSL01, Руководство по установке, Страница: 25 / 28

Поделиться
Скачать
True Manufacturing Company GDM-HST02-HC-TSL01 Скачать руководство пользователя страница 25

GDM HST02

TEC_TM_158 | REV. A | EN

06/28/2022 

Page 25 of 28

www.truemfg.com

Cabinet Adjustments, Servicing, & Component Replacement

NOTE:  Any cabinet adjustments are to be made AFTER the 

cabinet has been verified level and properly supported.

Servicing & Replacing Components

•  Replace component parts with original equipment 

manufacturer (OEM) components.

•  Have a licensed service provider service your unit to minimize 

the risk of possible ignition due to incorrect parts or improper 
service and to ensure the operator's health and safety.

•  Unplug the refrigerator/freezer before cleaning or making 

any repairs. Setting temperature controls to the 0 position or 
powering off an electronic control may not remove power 
from all components (e.g., light circuits, perimeter heaters, and 
evaporator fans).

FOR MORE INFORMATION

For additional maintenance instruction, please visit the media center at 

www.truemfg.com

Содержание GDM-HST02-HC-TSL01





























Отзывы:

Нет отзывов