manualshive.com logo in svg

True Manufacturing Company GDM-HST02-HC-TSL01, Руководство по установке, Страница: 12 / 28

Поделиться
Скачать
True Manufacturing Company GDM-HST02-HC-TSL01 Скачать руководство пользователя страница 12

GDM HST02

www.truemfg.com

TEC_TM_158 | REV. A | EN

06/28/2022 

Page 12 of 28

Cabinet Operation

Startup

•  The compressor is ready to operate when the unit is purchased. 

All you need to do is plug in the cooler.

•  Excessive tampering with the control could lead to service 

difficulties. If replacing the temperature control is ever needed, 
be sure to order the replacement from your TRUE dealer or 
recommended service agent.

•  Good air flow inside your TRUE unit is critical. Take care to 

prevent product from pressing against the sides or back 
wall and coming within 4" (101.6 mm) of the evaporator 
housing. Refrigerated air off the evaporator coil must circulate 
throughout the cabinet for even product temperatures.

NOTE: If the unit is disconnected or shut off, wait 5 minutes 

before restarting.

RECOMMENDATION

 – Before loading product, run your TRUE 

unit empty for 24 hours to verify proper operation. Remember, 

our factory warranty DOES NOT cover product loss!

Light Switch on Glass Door Models 

Inside the top ceiling.

FOR MORE INFORMATION

For more information regarding a cabinet's temperature control adjustment or general sequence of operation,  
please see our 

Temperature Control Adjustment—Sequence of Operation Manual

 in our resource library at  

https://www.truemfg.com/Service-Manuals/Sequence-of-Operation

 or follow the QR code. 

Electronic Temperature Control 

On the front of grill.

Temperature Control & Light Switch Location

The light symbol 

 

shows the approximate location of the light 

switch. 

Содержание GDM-HST02-HC-TSL01





























Отзывы:

Нет отзывов