TruCluster 380578-B21 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 88

background image

About This Technical Update

The material in this technical update provides an update to the information
that is provided in Chapter 6 (Fibre Channel) of the Version 1.6 TruCluster
Software Products Hardware Configuration manual. It also updates the
previous version of this technical update dated 9 February 2000. This update
is required because of new support for Fibre Channel arbitrated loop.

This technical update is valid for Fibre Channel fabric and arbitrated loop
topologies with TruCluster™ Software Products Version 1.6 and Tru64™
UNIX Version 4.0F with New Hardware Delivery-2 (NHD-2) (or later)
Tru64 UNIX Version 4.0F New Hardware Support (which includes the

emx

manager (

emxmgr

) utility and support for the DS-KGPSA-CA Fibre Channel

host bus adapter).

Fibre Channel arbitrated loop support requires Tru64 UNIX/TruCluster
Software Products patch kit 4 (

duv40fas0004-20000613.tar

) in addition

to new hardware support NHD-2 (or later). You may obtain the patch kit
from

http://www.support.compaq.com/patches/index.html

.

The Version 1.6 TruCluster Software Products Hardware Configuration
manual provides a method of using the

/sys/data/emx_data.c

file and

a kernel rebuild to synchronize worldwide name-to-target ID mapping in a
fabric topology.

The procedures in this Technical Update use the new

emx

manager utility

(

emxmgr

). They provide an easier, more direct method to synchronize

worldwide name-to-target ID mapping. This is the preferred method.

Audience

If you plan to use Fibre Channel hardware in your TruCluster hardware
configuration, read this addendum to the TruCluster Software Products
Hardware Configuration manual.

Organization

This technical update contains five chapters and an appendix:

•

Chapter 1: Fibre Channel Overview — Provides a basic overview of
Fibre Channel terminology and topologies, plus example Fibre Channel
cluster configurations.

About This Technical Update vii

«
...
5
6
7
8
9
...
»

Содержание 380578-B21

























































































Отзывы:

Нет отзывов

Похожие инструкции для 380578-B21

WORKCENTRE C2424

Бренд: Xerox Страницы: 12

WorkCentre M118

Бренд: Xerox Страницы: 25

Бренд: Yamaha Страницы: 5

OneVision DEFINITY G3 Fault Management and integration

Бренд: AT&T Страницы: 153

Бренд: Arturia Страницы: 10

Бренд: Cabletron Systems Страницы: 92

Writing an embedded application loader

Бренд: Sierra Wireless Страницы: 9

Бренд: Sierra Wireless Страницы: 16

Бренд: SAP Страницы: 31

Бренд: Adaptec Страницы: 133

Active Management Technology v4.0

Бренд: Intel Страницы: 143

Бренд: GRASS VALLEY Страницы: 2

Бренд: UNIBLUE Страницы: 4

SystemTweaker 2010

Бренд: UNIBLUE Страницы: 13

NetBackupTM 5.0

Бренд: VERITAS Страницы: 428

Trillium Lane Labs

Бренд: DigiDesign Страницы: 114

Rampage IV Extreme

Бренд: Asus Страницы: 179

EQ Sampling System Q-Clone

Бренд: Waves Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды