3
1.0.
Introduction:
The Display is designed for both In Cab mounting and Handheld operation is a touch screen
with RF range of about 1000 feet line of site.
Display works with weight sensors for all suspension types; air, spring, walking beam, Chalmers,
Tuff Track, etc…
Note, when first powering unit on, wait 30 seconds for sensors to synchronize, before pressing
any buttons.
The Display can be powered by Truck power and/or internal Lithium-Ion re-chargeable battery
(optional).
Battery life is 5 hours when fully charged continuous use. WIFI turned off. WIFI is only used if
the firmware is being upgraded, then turned off after upgrade is loaded.
The display can be set up for any truck and trailer configuration with a truck that can hook up to
three trailers connected to one truck. The system can drop and hook between an unlimited
number of trailers.
Top Line(s) are equipment ID. Each sensor will have a unique ID and will have the axle position,
Front Axle, Drive Axle, Trailer, for example. You can have a truck and four trailers connected to
a truck.
Hook, is used to drop and hook different trailers.
