9
Note, sensors usually come configured, whereby, Equipment ID, axle position (front axle,
Drives, Trailer, Lift, Jeep, Stinger, etc…), and sensor type (air, load cell, etc.. are pre-set before
shipping. Each sensor’s configuration can be changed, if required.
6.1 Sensors
6.2 Sensors continued.
7.0 Calibration:
Password: 11258.
SENSOR list screen.
Select which sensor you wish to see or change
Properties of sensor, changing selection will
Show Equipment it belongs to and Axle.
Press Properties Button will go into next
Screen below.
SENSOR Properties screen.
Press Sensor Type button to change sensor type.
Press Axle to change axle and select from list.
Value shows last value received from sensor.
Weight shows last weight received.
Temperature show sensor internal temp in
Centigrade.
Signal Strength shows sensor range value.
Received Count shows the packets received.
Press Save to send changes to sensor.
