Tru-Turf RB48-11A Golf Green Roller, Оригинальное руководство пользователя

Страница: 12 / 56



Operation procedures
Points to remember
• Make sure the roller is serviceable before rolling.
• Start rolling from the fringe of the green.
• Smooth operation on the foot pedals.
• Pick a point on the other side of the green to roll to.
• Do not look at the green close to the roller; it makes it
diffi cult to steer the roller straight; look well ahead.
• Use 1/2 throttle until you are profi cient at operating
the roller.
• Once you choose your rolling line hold the joystick
steady, correcting direction gently as required.
• Move the steering joystick a little at a time to change
direction; excessive movement of the joystick makes it
diffi cult to maintain a straight line.
• Roll in straight lines.
• Do not leave the engine running with the roller parked
on the green; the engine vibration will cause roller
depression marks on the green.
• Move off the green when rolling is complete before
putting the trailer in the down position.
• When rolling steep greens and the engine stops, check
engine oil level. The engine is fi tted with a safety
switch; when the engine oil level is low the engine will
stop.
When stopping and before getting off the
machine always apply the Park Brake.
• When rolling of the green is completed, move the
roller onto the fringe, stop the engine, lock the trailer
into the towing position, connect it to the towing
vehicle then move off to the next green to be rolled.
Do not put the trailer down into the towing position
on the green; damage may occur to the green from
the roller tires and body.
• Remember turn off the fuel cock whilst towing the
roller.
This machine is equipped with a Safety Interlock
System.
This operates similar to Ride On Mowers where if the
operator attempts to leave the seat while the engine is
running and has not fully engaged the parking brake the
engine will stop.
Park brake
• The park brake lever operates on an over centre
principal.
• To engage the park brake, pull the park brake lever
fully up and back.
• The park brake lever will remain in this ON position.
• To disengage the park brake, push the park brake lever
fully forward and down.
• The park brake lever will remain in this OFF position.
• Always operate the roller with the park brake OFF.
Caution: Do not operate the roller with the park brake
engaged as this will damage park brake components.
Starting the Engine
The engine will not start unless the Park Brake lever is in
the fully engaged or On position.
Refer to the included Honda user manual for correct
engine starting and running procedure.