Tru-Turf RB48-11A Golf Green Roller, Оригинальное руководство пользователя

Страница: 16 / 56



Fault Finding
Fault Finding
Roller will not move one or either way, check:
• Chain is okay
• Sprockets are not worn or slipping on the shaft
• Foot control is operating - check all arms are secure
• For Sheared Sprocket Keys
• Rubber coupling broken
Roller will not steer, check:
• Woodruff Key is in place and not sheared
• Rod ends are connected to smoothing roller head and
the steering arm
• Rod ends are not broken or seized
• Centre swivel bearing on top centre of each smoothing
roller head has not seized
• Connecting rod are in place and serviceable
Roller has excessive vibration, check:
• Disconnect engine-to- transmission and isolate the
drive chain to determine whether the problem is in the
engine or in the transmission.
• If engine is at fault contact your nearest engine agent
for rectifi cation.
• If the transmission is at fault, repair or replace as
necessary, or seek professional advice from a local
Eaton Service Center
• Any out of alignment between engine and
transmission.
• For damaged engine and transmission couplings
Smoothing rollers seized, check:
• Bearings have not seized
• Replace if necessary
• Accumulated dry debris is not locking the
smoothing rollers.
Rubber drive roller will not rotate, check:
• Roller shaft end bearings have not seized
• Broken chain
• Slipping sprockets
• The Park Brake is not locked on
Engine will not start
• Park Brake Lever is not fully engaged.
• Engine switch is not in the on/run position.