23
BATTERY REPLACEMENT
As an accessory, there is the possibility of acquiring an extra battery, to be able to
change in case the battery runs out, and you want to continue driving.
Check the following procedure:
1.
Ensure power is turned off, and the kill switch is disconnecting.
2.
Lie down the ON-E on the ground carefully.
3.
With a
5mm
allen wrench, take off 4 screws of the skid plate.
4.
Unplug the connector from the battery, twisting the lock ring and pulling the
connector out.
5.
With a 8mm drive metric sockets, remove the 4 screws of the plastic cover
battery.
6.
Carefully remove the battery.
7.
Assembly the other battery and follow the instructions in the opposite order.
Put your ON-E on the ground and with a 5 mm Allen wrench, remove the 4 screws from
skid plate of the chassis and unplug the connector from the battery twisting the lock ring
counterclockwise.
Then remove the screws from the plastic cover battery with a 4mm drive metric sockets and
remove battery.