TP Screw (3x20mm)
Center
line
Retracts strut
LockNut(4mm)
Bushing (8X6mm)
Wooden Block
1.5mm
200mm
20mm
Note:rubber wheels oleo struts
and retracts are optional.
TP Screw(3x20mm)
4
6mm
2
Wood dowel (6x30mm)
1
Rib template (2mm ply)
Rib template (2mm ply)
6mm
Rib template (2mm ply)
Assemble the gear doors and the wheels to the retracts.
Drill holes for pulling out the servo extension line.
Assemble the retract
Epoxy the PVC parts to the wing tip as below.
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
According to the rib template drill holes to another
main wing.
4
21
20
19
16
18
17
1.5mm
10
TP Screw (2.3x6mm)
Ply (15x15x3mm)
10
1.5mm
5
TP Screw (2.3x6mm)
Ply (15x15x3mm)
5
TP Screw (2.3x6mm)
TP Screw (2.3x6mm)
Epoxy plies under the canopy and assemble the
canopy to fuselage with screw.
Epoxy the plies under the cowing in fuselage and assemble
the cowing to fuselage with TP screw.
Trim the canopy along the shaded line.
Trim the cowling along the shaded line.
Epoxy the exhaust to the cowling from lnner.
Epoxy the PVC decoration to appropriate position asbelovo.
13
71
67
69
66
68
70