manualshive.com logo in svg
background image

1.0/0416/HF

LONDON DOLL PRAM

MODEL NUMBER*:

55564 - Gray

If you need product

parts, see below or Page 2!

Assembly and Use Instructions. Adult assembly Required.

Read all instructions before use. 

This manual is part of the product and 

must be saved for future reference.

VERSION CODE*:

1.0/0416/HF

* Model and Version numbers are needed 

if replacement parts are requested

FOR REPLACEMENT PARTS:

Go to our web site: http://www.badgerbasket.com/parts

Or scan QR code at right with your smartphone

Содержание LONDON DOLL PRAM

Страница 1: ...sembly Required Read all instructions before use This manual is part of the product and must be saved for future reference VERSION CODE 1 0 0416 HF Model and Version numbers are needed if replacement parts are requested FOR REPLACEMENT PARTS Go to our web site http www badgerbasket com parts Or scan QR code at right with your smartphone ...

Страница 2: ...LL INSTRUCTIONS before use of this product Use only the parts and hardware provided by Badger Basket Keep instructions for future use Do not use the product if it is damaged or broken Periodically inspect the product to ensure all parts remain tight This item is a toy for dolls only It is never to be used for real infants or pets No product is a substitute for adult supervision Always supervise yo...

Страница 3: ...onger wheel posts on the METAL CHASSIS A Push the metal bracket at the center of the wheel inward to open it PHOTOS 1 and 2 slide the wheel onto the end of the post and release the bracket The bracket locks over the tip of the rod and if you tug on the wheel it should not come off STEP 2 Attach the PRAM BODY D to the METAL CHASSIS A Line up the four hinges on the CHASSIS with the four brackets on ...

Страница 4: ... hinges locked to keep it up or unlock the hinges and fold it flat A Metal Chassis B Large Wheel C Small Wheel D Pram Body E Handle F Hardware Bolts Spacers Cap Nuts G Fabric Bedding Padded Mat Pillow Boot FINAL ASSEMBLY A B C E F D G Boot Snaps and Spindles STEP 3 Attach the HANDLE E to the PRAM BODY D using the HARDWARE KIT F FOUR BOLTS FOUR SPACERS FOUR CAP NUTS ALLEN WRENCH and CAPWRENCH Align...

Отзывы: