16
OIL AND FUEL
USING THE RIGHT OIL
Use a high-quality SAE 30 weight oil.
DO NOT
use dirty oil. Failure to use clean oil of the correct type
can cause premature engine wear and failure.
ADDING OIL: INITIAL USE
NOTE:
This unit was shipped without oil in the crankcase. Oil must be added before starting the unit.
NOTE:
Never add oil to the fuel tank. This unit has a four-cycle engine.
DO NOT
mix oil with gasoline.
1.
Set the unit on a flat, level surface.
2. Unscrew the oil fill plug (Fig. 8).
3. Pour 3.04 fluid oz. (90 ml) of oil into the oil fill hole (Fig. 8).
NOTE:
This unit comes with a 3.04 fluid oz. (90 ml) container of oil.
NOTE: DO NOT
overfill. Refer to
Checking the Oil Level
.
4. Wipe up any oil that may have spilled.
5. Make sure the O-ring is in place on the oil fill plug (Fig. 8).
6. Reinstall the oil fill plug.
WARNING:
DO NOT
overfill the crankcase.
OVERFILLING THE CRANKCASE MAY CAUSE SERIOUS PERSONAL INJURY.
Fig. 8
Oil Fill Plug
Oil Fill Hole
O-Ring
Содержание 25A-304-766
