Troxler ICO 4740, Руководство по эксплуатации и инструкции, Страница: 63 / 171

ICO 4-7
press
(
3
)
.
For more information, refer to page 5-
35.
d. Press
(
4
)
to enter the customer name.
For more
information, refer to page 5-35.
e. The oven features a
System Information
function that
outputs a listing of operating parameters to the
serial communications port once each second, either
anytime the oven is powered on or only during a
burn cycle. As shipped, this feature is turned off. To
turn the system information output on or off, press
(
5
)
.
For more information, refer to page 5-36.
f. Press
(
ESC
)
to return to the
MAIN MENU
.
7. Press
(
1
)
to access the
Burn Setup Menu
. For more
information, refer to page 5-4.
a. Press
(
1
)
to access the
Burn Parameter Menu
.
For
more information, refer to page 5-4.
Set the burn
mode to
Program Time
or
Auto-Control
, as desired
(the default setting is
Auto-Control
). Set the desired
burn time and/or cutoff limit. Set the calculation
type to
bitumen-to-sample
or
bitumen-to-aggregate
,
as desired (the default is
bitumen-to-sample
). Select
the desired burn profile. Press
(
ESC
)
to return to
the
Burn Setup Menu
.
b. The oven features an
Auto-Print
function that, when
turned on, automatically prints sample data during a
burn cycle. As shipped, this function is turned on. To
change the status of the
Auto-Print
function, press
(
2
)
.
For more information, refer to page 5-10.
c. The oven also includes an
Auto-Store
function that,
when on, automatically stores sample data in the
active project upon completion of a burn cycle. As
shipped, this function is turned off. To turn the
Auto-
Store
function on, press
(
3
)
.
For more information,
refer to page 5-12.
d. Press
(
ESC
)
to return to the
MAIN MENU
.